Thursday, September 26, 2019
Training Faculty to Teach Online Research Paper Example | Topics and Well Written Essays - 750 words
Training Faculty to Teach Online - Research Paper Example à There is also the principle that learning materials and measured teaching outcomes will contain and provide appropriate information. By appropriate information, it is expected a well-trained faculty would focus their learning resources on the provision of information that directly matches what the online program is designed to accomplish. What is more, there is a principle that measures on timely the information given by the faculty is considered by learners to be. This is an important principle, given the fact that learning information is dynamic and subjective to time. By implication, the process of evaluation looks at the ability of faculty to be on top of issues and abreast with time so that information delivered will not be considered as not being relevant for the time for which it is being delivered. Lastly, there is a principle that dwells on the need for faculty teaching to be self-evaluative. Effective management of teaching in the online training programShattuck and Ter ry likened the management of teaching effectiveness to the sustainability of effective teaching and learning that is attained from online programs. With this said, it is expected that during online training programs and even by the close of the programs, there will be principle that checks for the sustainability of effectiveness. One of these principles for the management of teaching in online training programs is the need for there to be faculty support services provided in specific areas related to teaching online.
Australian taxation law Assignment Example | Topics and Well Written Essays - 2000 words
Australian taxation law - Assignment Example (1+GST rate) ? FBT rate Hence, the following benefits of Paul shall be as follows: Car fringe Benefit $22,500 Entertainment Fringe Benefit $ 2,000 Loan Fringe Benefit $ 8,000 ---------------- Employerââ¬â¢s type 1 aggregate fringe benefits $32,500 amount 46.5% + 10% ------------------------------------------- $32,500 x (1 ââ¬â 46.5%) ? (1+ 10%) ? 46.5% rate $32,500 ? 2.0647 = $67,102.75 Total Fringe Liability This is the total value of the fringe benefits tax liability of Chatswood Pty Ltd. for the year ended 31 March 2011. For purposes of computation, ââ¬Ëthe FBT year is the 12 months beginning 1 April and ending 31 March. Currently, the FBT rate is 46.5%. A GST of 10% is applied on most goods and services that are supplied in Australia and on goods imported into Australiaââ¬â¢2. ââ¬ËIf an employee receives certain fringe benefits with a total taxable value of more than $1,000 in an FBT year (1 April to 31 March), employer must report the grossed-up taxable value of the benefits on their payment summary for the corresponding income year (1 July to 30 June). This is called the reportable fringe benefits amountââ¬â¢3. Therefore, the Fringe Benefits Tax (FBT) that should be paid by the employer Chatswood Pty Ltd., at the end of the year is $67,102.75. The car fringe benefit, the loan fringe benefit and the entertainment fringe benefit which were granted to Paul by his employer are all entitled to Goods and Services Tax (GST) credit that is available to Chatswood Pty Ltd. However, the $1,000 salary of Paul is not considered as a fringe benefit since there is an imposed tax on the salary which is being paid by the employee. As defined under the Finance Act of 2005: ââ¬Å"Fringe Benefitsâ⬠means any consideration for employment provided by way of: (a)à à à ââ¬Å"any privilege, service, facility or amenity, directly or indirectly, provided by an employer, whether by way of reimbursement or otherwise, to his employees (including former employee or employees) (b)à à à any free orà concessionalà ticket provided by the employer for private journeys of his employees or their family members;à à and (c)à à à à any contribution by the employer to an approved superannuation fund for employeesâ⬠.4 The total value of all fringe benefits given to a particular employee by his or her employer in an FBT year is known as their individual fringe benefits amount. 2. Peterââ¬â¢s is liable to pay a capital gains tax (CGT) for the sale of the gift shop for the year 2010/2011 based on the following computation: Gross Sale Proceeds from the gift shop: $840,000 Less: Incidental Cost of Disposal : $(60,000) Net Sale Proceeds: $780,000 Less Cost of Asset: $(450,000) Capital Gain: $330,000 Therefore, Peter shall be liable to pay a CGT on his gain amounting to $330,000. ââ¬ËCapital gains tax is a tax on the profits which may be made from the sale of capital assets. Only individuals are liable to pay CGT, cor porations are not liable to CGT. A liability to pay CGT arises only when a chargeable person makes a chargeable disposal of a chargeable assetsââ¬â¢5. Some of chargeable assets include lands and buildings, paintings, jewelry, plant and machinery. However, no CGT shall be imposed on the sale of his main residence as he is entitled to ââ¬ËPrivate Residence Reliefââ¬â¢. To qualify for the exemption based on the ââ¬ËPrivate Residenc
Wednesday, September 25, 2019
Independents study Essay Example | Topics and Well Written Essays - 2500 words
Independents study - Essay Example Ordinarily, marketing is considered an activity or function performed by business firms. However, marketing can also be carried out by other organizations and even by individuals. Whenever you try to persuade somebody to buy something, you are performing a marketing activity. Broadly viewed, the essence of marketing is a transaction - an exchange. Marketing occurs any time one social unit strives to exchange something of value with another social unit. Thus, marketing consists of all activities designed to generate and facilitate any exchange intended to satisfy human needs or wants ( Stanton, 1991). eMarketing is the "product of the meeting between modern communication technologies and the age-old marketing principles that humans have always applied.E-marketing or electronic marketing refers to the application of marketing principles and techniques via electronic media and more specifically the Internet. The terms eMarketing, Internet marketing and online marketing, are frequently interchanged, and can often be considered synonymous." eMarketing is the process of marketing a brand using the Internet. It includes both direct response marketing and indirect marketing elements and uses a range of technologies to help connect businesses to their customers. By such a definition, eMarketing encompasses all the activities a business conducts via the worldwide web with the aim of attracting new business, retaining current business and developing its brand identity. E-marketing involves marketing planning within the context of the e-business e-environment. So not surprisingly, the successful e-marketing plan is based on traditional marketing disciplines and planning techniques, adapted for the digital media environment and then mixed with new digital marketing communications techniques This research looked into the advantages and limitations of eMarketing in an attempt to guide prospective marketers in the sale of their products. The Research Problem This research tried to look into the advantages and limitations of eMarketing. Much has been said about these aspects of emarketing but a few so far had looked into the benefits and limitations derived from it. Specifically, it attempted to answer the following questions: 1. What is eMarketing 2. What are the advantages of eMarketing 3. What are the limitations/disadvantages of eMarketing Related Literature This part describes and discusses important concepts, ideas, judgments and opinions of experts and authorities on topics which have bearing on the present study. The studies and literature have been reviewed to provide insights and to help the researcher in formulating problems and hypothesis and aid in the analysis and interpretation of data. What is eMarketing eMarketing is essentially part of marketing. The American Marketing Association (AMA) definition (2004) is as follows: "Marketing is an organizational function and a set of processes for creating, communicating and delivering value to customers and for managing customer relationships in ways that benefit the organization and its stakeholders." Therefore eMarketing by its very nature is one aspect of an organizational
Tuesday, September 24, 2019
Applying lewin theory Case Study Example | Topics and Well Written Essays - 750 words
Applying lewin theory - Case Study Example This was to ensure why change was necessary and be able to let go of the present comfort zone. He recognized all the risks of making big changes in himself, the company as well as the colleagues but he was prepared to take action to every reaction. In this stage he expected complains from his colleagues due to the changes he was making. The change involved having a leaderless team, change the companyââ¬â¢s name and lay off the current supervisor of the group. This was the second stage which involved implementing the required changes and coming up with more efficient and effective ideas after all the team members have agreed to the same. Glen requested reinstatement by filing grievances and John allowed him to stay in the group but not as the group leader. John weighed all his options and decided that the teams should not inquire anything from him instead they should review everything they discuss in their group meetings. This was to empower them to their desired destiny as they would have opportunities to control their own work. This stage was involved moving the work mates and the entire business to incentive for transformation. The changes made by John were not easy for Glen and other team members in the company. The first team meeting they had after the changes, they did not know how to proceed since they did not have someone to give them such details (Simms & Knowledge, 2005). William who had always thought of being a team leader volunteered to start off the meeting but he did not know what to tell the rest of the team. Though William had never been a formal team leader before, he was allowed to stand in to ensure that meetings were held. The next meeting they he came with ideas of how to improve the company but the rest of the team members never agreed on his thoughts instead, they spent the rest of the meeting voting on things they
Monday, September 23, 2019
Quality of Financial reporting Assignment Example | Topics and Well Written Essays - 250 words
Quality of Financial reporting - Assignment Example h of the company depends on various intangible attributes, it becomes quite challenging to examine its real or actual financial performances (Intel Corporation, 2010). Cost of goods sold: The inventory computation process of Intel is focused on the First-In-First-Out method. To comprehend the loss recognition of the written down values of inventories, the company tends to capitalize interests based on the borrowings treating the grants as additional expenditures for the stock (Intel Corporation, 2010). Operating expenses: The depreciation of the tangible assets is calculated in a straight-line method by Intel after capitalizing the interests on borrowings in the net worth of the asset. Impairment costs are charged on goodwill, non-marketable equity investments and other intangible assets which are also reviewed annually to monitor any changes. The acquisitions during research and development process are also identified as an intangible asset liable for amortization costs (Intel Corporation, 2010). Non-operating revenue and expenses: The net interest income generated by the company is computed after deducting the interest expenses incurred during the fiscal year along with other nets. Equity income is also calculated in relation to both its marketable and non-marketable equity investments. The financial statements of the company also depict the income tax changes along with the probable reasons for such alterations increasing its transparency. The financial statements are elaborate on the discontinued functions in relation to various investment activities initiated by the company (Intel Corporation, 2010). Other issues: The consolidated financial statements apparently depict the material alterations caused in relation to outstanding shares of Intel over a given period of time. The cash flow statement as well as the income statement also depicts the computation process of operating earnings before taxation and after taxation charges following the guidelines of
Sunday, September 22, 2019
Analysis of Anselms Ontological Argument Essay Example for Free
Analysis of Anselms Ontological Argument Essay This premise does not state that Godââ¬â¢s strengths as this argument is to prove his existence, not whether or not God is all-powerful, all-knowing and all-good. The second premise means this greatest possible being is either an imaginary being that one has thought of or, a being that we not only is not only thought of but also exists. The third premise and its sub premises states because existing in reality is greater than existing in thought, then the God we have thought of exists in reality or there must be a greater, or more perfect, being that does exist and that being is God. This leads to the conclusion, if you accept the premises then you accept the existence of the greatest being possible, God. This concept of Godââ¬â¢s existence is also led with the idea that God is a necessary being, a being that is not dependent of something greater in order to exist. If God relied on another being, like how a children rely on parents to conceive them, then this being called God is not God because it would be imperfect. Therefore, there must be another to call God that meets all the requirements for perfection. One of the first popular objections was created by Gaunilo of Marmoutiers. The premise and conclusion to Gauniloââ¬â¢s argument is identical to Anselmââ¬â¢s argument except with the replacement of the word ââ¬Å"Godâ⬠with ââ¬Å"the Lost islandâ⬠and the word ââ¬Å"beingâ⬠with ââ¬Å"islandâ⬠. As simple as that, though Gauniloââ¬â¢s argument is completely absurd, Gauniloââ¬â¢s reductio ad absurdum also proves to be as deductively valid as Anselmââ¬â¢s argument. However, this ââ¬Å"Lost Islandâ⬠could in no way exist. The absurdity and validity of ââ¬Å"the lost islandâ⬠quickly brought up questions as to how Anselmââ¬â¢s Argument cannot be absurd. Anselmââ¬â¢s argument was not proven invalid until Immanuel Kant, a german philosopher during the 18th century, proposed an objection that would be the decisive blow to the Ontological argument (Immanuel Kant. Wiki). Kantââ¬â¢s objection is how existence is not a predicate (Mike, screen 25). A predicate is used to describe something the subject (this being God in Anselmââ¬â¢s Argument) is doing. In Aselmââ¬â¢s Argument, Anselm premise rely on that being conceived and existing in reality is something that describes God. This rationality does not follow because to exist or conceive does not describe the subject, it only tells us whether it exist or not. Much like how fictional characters do not exist, describing cartoon for example would tell us details of what this cartoon looks like, what its habits are and common antics it goes through, but not whether it exists or not. The question of existence must fall in a separate argument that does not define the character. As there are Arguments to prove God, there are debatable arguments to disprove the God. The First version of ââ¬Å"The Argument from Evilâ⬠goes as follow: 1. If God were to exist, then that being would be all-powerful, all-knowing, and all-good. 2. If an all-PKG existed, then there would be no evil. . There is evil. [Conclusion] Hence, there is no God (Sober, 109) The first premise is the definition of what God would be if he were to exist. That is a being that has the power to do anything, had knowledge of everything throughout the span of time and is in all ways good. The second premise is created with the first premise in mind. To expand on the second premise i t states, if God were all-powerful he could stop any form of evil from happening, if he is all knowing then he has knowledge of when evil will occur and if he is all-good then God would stop all evil from happening. If god cannot stop all evil from happening then the definition of God must be incorrect. He then must not be powerful enough to stop all evil, and/or he doesnââ¬â¢t know when evil until it has already occurred and/or good is not all good in that God does not wish to stop all evils. The third premise is stating the fact that there is evil in the world. The conclusion derived since that there is evil, then is what may be defined as God must be lacking in one or two of his qualities and therefore God, by definition, does not exist at all. In order for God to be compatible with evil, God must only allow the evils that would, in turn, lead to a greater amount of good and must take the route that leads to the least amount of evil to gain the greatest amount of good. The soul building defense was created in mind that evil and God co-exist in our world. The defense is that without any evil in the world, our souls would not nurture, or, understand the concept of evil. This defense does not hold true because there has been many evils in the world that seem unacceptable, even though it may have been for the purpose of soul building. God, and all-good being, would then only allow the evils that are essential in soul-building. This would only mean that evil that man commits against man. The reason for this is because anything that happens in nature exceeds soul-building essentials. Another defense is God having given us free will, humans ultimately are the causes of this evil. That is true but the common objection to this is that human do more than enough evil to ourselves, it is going too far to have God throw tornados, volcanic eruptions, and hurricanes at us too. At what point do human have such control over nature. The last defense is that God simply works in mysterious ways. Who can explain why natural events take so many lives and injure many others or why some children have to go through great deals of suffering and live through it? It is Godââ¬â¢s way and ultimately, no matter how incomprehensible the evil is, it is for the greater good. Certainly the question to Godââ¬â¢s existence has been pondered upon by philosophers for over a very long period of time with no progress as whether God exists or not. The ontological argument created by Anselm withstood a great deal of criticism until it was disproved by Kant over 600 years after the fact.
Friday, September 20, 2019
Liquid Liquid Equilibrium of Pold (Ethylene Glycol)
Liquid Liquid Equilibrium of Pold (Ethylene Glycol) LiquidLiquid Equilibrium of Poly (ethylene glycol) 1500 + di-Potassium Tartrate +Water at different pH (6.41, 7.74 and 9.05) Alireza Barani Chemical Engineering Department,Faculty of Engineering, Shomal University, Amol, PO Box 731, Iran Mohsen Pirdashti[1] Chemical Engineering Department,Faculty of Engineering, Shomal University, Amol, PO Box 731, Iran Abbas Ali Rostami Chemical Engineering Department,Faculty of Engineering, Shomal University, Amol, PO Box 731, Iran Abstract: Liquid liquid equilibrium (LLE) data have been determined for aqueous two-phase systems (ATPSs) containing (ATPS) poly (ethylene glycol) (PEG) 1500 +di potassium tartrate +water at 298.15 K and in various pH values (6.41, 7.74 and 9.05). Two physical properties (density and refractive index) were used to obtain the compositions of phase and the ends of the tie-lines. The effect of pH on the binodal curve, tie-line length and slope of tie line are discussed. The binodal curves of these systems have been correlated by Bleasdales equation. Furthermore, the Othmer-Tobias and Bancroft equations was used to correlate the tie line data points. Finally, the effective excluded volume (EEV) of the salt into the PEG aqueous solution were obtained. Keywords: ATPS; Phase diagram; pH; Refractive index; Poly(ethylene glycol); di potassium tartrate Introduction The dissolving of one polymer and one salt or two aqueous polymer solutions together in water results in the formation of two immiscible aqueous phases systems, called Aqueous Two-Phase Systems (ATPSs). Albertson introduced these systems in 1965 for the purpose of separating the biological materials1. Several industries can benefit from employing ATPS including biotechnology, petroleum, paint, adhesives, and pharmaceuticals 2, 3. Moreover, the ATPS is effective in providing separation technique due to its undemanding scale-up viability 4-6, economic efficiency7, 8, ease of continuous process 9, decreased interfacial tension 10, short processing time 11, low energy consumption 12, 13, good resolution 14, high yield 15, relatively high load capacity 16, and selective extraction 17. The data derived from phase diagram, composition and the physical properties of the phase formation are essential in order to optimize, design and increase the size of these processes; and develop the models that predict phase partitioning18-20. Poly Ethylene Glycol (PEG) is a water-soluble hydrophilic and biocompatible polymer employed by the studies about ATPS 21. Accordingly, Selber et al. (2004) 3 provided a useful summary of experimental liquid-liquid data and equilibrium diagrams for systems including PEG, inorganic salts and water. Peng et al.10 (1995) investigated the phase diagram and protein partition coefficient in ATPS containing PEG and K2HPO4 + KH2PO4 and found some merits in this polymer-salt system. Furthermore, several studies 22-27 have focused on the Liquid-Liquid Equilibrium (LLE) data of PEG + salt ATPSs. Zafarani-Moattar et al. (2008) indicated some advantages of using tartrate such as biodegradability and effectiveness in partitioning of biological materials through being discharged into biological waste water treatment plants 27. In the current study, the phase equilibrium data for PEG1500 +di-potassium tartrate (K2C4H4O6 ) +H2O were determined at 298.15K and th ree pH values (6.41 , 7.74, and 9.05). In addition, the effects of pH on the binodal curve and Tie-Line Length (TLL) and Slope of Tie Line (STL) were determined. Likewise, the calibration curves were applied as an analytical technique [MN1]with measuring the density and refractive index. Finally, Othmer-Tobias and Bancroft equations 28 were used to fit the tie- line data and Bleasdales equation was employed 29 to correlate the experimental LLE data from the investigated systems. Experimental Materials To prepare the materials, PEG [HO (C2H4O) n H] with average of 1500 gmol-1 and di potassium tartrate with minimum purity of 99.5% by mass were obtained from Merck. The polymer and salts were used without further purification with the distilled deionized water. 2.2. Apparatus and Procedure. 2.2.1. Analytical Methods The same method of calibration plots and evaluation of parameters in the literatures 30 were employed to obtain the compositions in both phases from measurements of the two physical properties (density and refractive index) at 298.15 K. in order to obtain the compositions, calibration equations were previously obtained. Homogeneous ternary mixtures with compositions from 0 to 30 wt% (total solute composition) were prepared by weight, and then density and refractive index were measured at 298.15 K. the concentration of PEG and salt were obtained using eq 1, which related the refractive index and density to the concentration of salt and PEG at 298.15 K, where represents the mass fraction of PEG, is the mass fraction of di-potassium tartrate, and is the value of the refractive index and density of pure water at 298.15 K. Experimental data were fitted to polynomial expansions up to order 2 by least-squares (order 3 was proved unnecessary in all cases 23: (1) Where Z is the physical property (density or refractive index) and to are fitting parameters. The refractive index was determined by refractive index measurements at 298.15 K using a refractometer (CETI Belgium model) with an accuracy of 0.0001. Then, densities was measured by using an Anton Paar oscillation U-tube densitometer (model: DMA 500) with a precision of Ãâà ±10-4 g.cm-3. 2.2.2. Binodal Curve The experimental apparatus employed is similar to the one used previously 31. A glass vessel, volume of 25 cm3 was used to carry out the equilibrium determination. It was provided with an external jacket containing water at constant temperature. The temperature was controlled to within +-0.05 K. The binodal curves were determined by the cloud-point method 32. The cloud-point method was investigated by titration method where step by step and exactly known amounts of polymer (titrant) was added to an aqueous solution salt of known concentration (or vice versa) under stirring until the solution becomes cloudy. 2.2.3. The TLL and STL Tie lines were also determined using the equilibrium set designed by ourselves and according to previously described procedures [14]. For the determination of the tie lines, we selected 4 samples for each pH that were prepared by mixing appropriate amounts of PEG, salt, and water in the vessels. Samples were stirred for 5 min and settled for 24 h, with temperature controlling condition, to ensure that equilibrium was established. To separate the resulting phases, the tubes were centrifuged (Hermle Z206A, Germany) at 6000 rpm for 5 min. The resulted phases showed no turbidity and the top and bottom samples were easily separated. After the equilibrium was achieved, phases were with- drawn using syringes. The top phase was sampled first, with care being taken to leave a layer of material at least 0.5 cm thick above the interface. The bottom phase was remain in the glass vessel with a long needle. TLL provides an empirical measurement of the compositions of the two phases, which can be c alculated by the following equation: TLL= (2) Where and denote the concentration of PEG and salt in top and bottom phase, and STL is given by the ratio of the difference between the polymer and salt concentrations in the top and bottom phases as presented in Eq. 3: STL= (3) Where and are the polymer and salt concentrations, expressed in mass percent, respectively, and the superscripts T and B designate the top and bottom phases, respectively. 2.2.4.Binodal Curve and TLL Correlation For the binodal data correlation, the Bleasdales equation [27] can be suitably used to reproduce the binodal curves of the investigated systems (4) Where a, b, and c represent the fitting parameters and and demonstrate the polymer and salt mass fractions, respectively. The binodal data of the above expression were correlated by least-squares regression. The reliability of the measured tie-line compositions was ascertained by Othmer-Tobias (Eq. 5) and Bancroft (Eq. 6) correlation equations (5) (6) Where is the mass fraction of polymer in the top phase, is the mass fraction of salt in the bottom phase, and are the mass fractions of water in the bottom and top phases, respectively, and , , , and are the adjusted parameters. Besides, the obtained experimental data can also adapt to the equation provided by Guan and co-workers33 Ln (.WPEG/ ) + ./ = 0 (7) Where and stand for the polymer and salt molecular weight, respectively. Moreover, V* is the Effective Excluded Volume (EEV) of the salt in the PEG aqueous solution. Results and Discussion Fitting parameters of calibration equation The values of the coefficients a, b, c, d, e and f for the system studied are shown in table 1, respectively. Table 1.The value of the coefficients observed from eq. 1. 1.3341 0.0581 0.1302 -0.0718 0.2257 0.3882 à à /g.cm3 0.9842 0.6783 0.1761 0.0098 0.1643 0.1018 Binodal Curve The binodal curve data of the PEG + di-potassium tartrate + H2O system are presented in Table 2. Table 2. Binodal curve data of the PEG 1500 + di-potassium tartrate+ water system at 298.15 K and 0.1 MPa at different pH values 42.71 9.01 27.75 10.49 43.43 10.49 39.57 9.50 45.58 7.20 43.67 7.20 35.50 10.21 42.04 7.80 41.88 7.80 34.48 10.32 39.31 8.30 39.51 8.30 28.54 11.58 35.77 9.01 28.93 9.01 33.70 10.55 23.88 12.01 22.04 12.2 23.17 13.01 16.18 14.77 19.89 14.77 17.07 15.01 13.94 15.73 16.53 15.73 14.25 16.21 13.42 16.05 14.53 16.05 12.11 17.02 11.75 16.91 12.55 16.91 11.28 17.52 7.59 19.71 11.16 19.71 7.01 21.01 6.90 20.36 9.19 20.36 6.17 21.64 5.29 23.19 8.10 23.19 5.85 22.01 5.03 22.24 7.45 22.24 5.06 27.53 4.74 24.01 6.76 24.01 4.65 23.50 4.32 24.70 5.80 24.70 3.17 26.01 3.62 26.01 4.99 26.02 Standard uncertainties: u(wi) = 0.002; u(P) = 5 kPa; u(T) = 0.05 K. Figure 1 shows the binodal curves obtained from Bleasdales equation. The effect of pH is clear: very small on the size of the heterogeneous region. This trend is in agreement with the experimental results of de Oliveira [12] and Martins [15]. Figure 1. Phase diagram of the PEG (1500) + di-potassium tartrate + water (3) two-phase system at T = 298.15 K and various pH (6.41, 7.74 and 9.05): (à ¢-à ) experimental binodal (6.41(pink), 7.74(blue) and 9.05 (green); (à ¢-à ²) calculated binodal using Bleasdales equation (3). TLL and STL Tie line compositions are given in Table 4. Figure 2 presents the tie lines and the binodal curve together for the PEG + di-potassium tartrate + water system at 298.15 K. Figure2. Phase diagram of the PEG + di-potassim tartrate + water two-phase system at T = 298.15 K and pH 6.41 (a), 7.74 (b) and 9.05 (c) : (-à ¢-à ²-) experimental binodal; ; (- -à ¢-à - -) calculated by using eq. 4. Table 4. Phase composition, tie-line data and physical properties of PEG 1500 + di-potassium tartrate+ water aqueous two-phase system at 298.15 K and 0.1 MPa Total System (%mass) Top phase Bottom phase 6.41 17 20 10.55 33.70 1.1217 1.3922 23.50 4.65 1.1620 1.3703 31.80 2.24 17 21 10.21 35.50 1.1226 1.3936 24.01 4.31 1.1652 1.3705 34.10 2.26 18 20 9.50 39.57 1.1252 1.3965 25.01 3.70 1.1716 1.3710 39.07 2.31 18 21 9.01 42.65 1.1275 1.3985 26.01 3.17 1.1782 1.3717 42.97 2.32 7.74 17 20 9.01 35.77 1.1142 1.3919 23.15 5.29 1.1606 1.3710 33.62 2.14 17 21 8.30 39.31 1.1157 1.3932 24.01 4.74 1.1660 1.3714 37.96 2.20 18 20 7.80 42.04 1.1172 1.3947 24.70 4.32 1.1705 1.3718 41.33 2.23 18 21 7.20 45.58 1.1195 1.3966 26.01 3.62 1.1791 1.3727 45.97 2.23 9.05 17 20 4.01 39.51 1.0844 1.3831 25.18 6.76 1.1791 1.3781 39.00 1.54 17 21 3.30 41.88 1.0836 1.3835 27.01 5.80 1.1912 1.3796 43.17 1.52 18 20 3.08 42.66 1.0835 1.3836 28.01 5.34 1.1980 1.3806 44.87 1.49 18 21 2.80 43.67 1.0833 1.3838 28.80 4.99 1.2034 1.3814 46.59 1.48 The tie lines are determined by connecting each corresponding set of total, top, and bottom phase compositions. The coexisting phases are close in composition. A mass balance check was made between the initial mass of each component and the amounts in the bottom and top phases on the basis of equilibrium compositions. The mass of each phase was calculated from volume and density measurements. The relative error in the mass balance was less than 3 while those of the top phases ranged from 1.08 to 1.12 g/cm3. The density difference between the phases (ÃŽâ⬠à à ), increase with an increase in the TLL and slightly decrease with an increase in pH. From Figures 7, it is observed that the density differences between the phases show linear relationship with TLL. A comparable conduct was likewise depicted 31, 34, 35. Figure *. Relationship between density difference (ÃŽâ⬠à à ) and tie line length (TLL) for the PEG 1500 + di-potassium tartrate + water at different pH values. 3.4. Binodal curve and tie-line data correlation The coefficients of equation 4, along with the correspond
Subscribe to:
Posts (Atom)